Cargo Lamp Switch: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the cargo lamp unit from the headliner near the rear roof header. (Refer to LAMPS/LIGHTING - INTERIOR/CARGO LAMP UNIT - REMOVAL).

Fig.6 Cargo Lamp Switch Remove/Install:

3. From the back of the cargo lamp unit housing, firmly grasp the switch body.
4. Using hand pressure, pull the cargo lamp switch toward the outside of the lamp unit housing until it unsnaps from the housing.
5. Continue sliding the cargo lamp switch away from the terminal pins and out of the lamp unit housing.

INSTALLATION
1. Align the terminal receptacles in the cargo lamp switch with the terminal pins of the lamp unit housing.
2. Using hand pressure, push the cargo lamp switch toward the terminals of the lamp unit housing until it snaps into the housing.
3. Reinstall the cargo lamp unit onto the headliner near the rear roof header. (Refer to LAMPS/LIGHTING - INTERIOR/CARGO LAMP UNIT - INSTALLATION).
4. Reconnect the battery negative cable.