Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2003 >> Liberty 2WD L4-2.4L VIN 1 >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Transmission Mount >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Mount: Service and Repair

REMOVAL

NOTE: A resilient rubber cushion supports the transmission at the rear between the transmission extension housing and the rear support crossmember or skid plate.

1. Disconnect negative cable from battery.
2. Raise the vehicle and support the transmission.
3. Remove the nuts holding the support cushion to the crossmember. Remove the crossmember.
4. Remove the support cushion nuts and remove the cushion. Remove the transmission support bracket bolts and remove the bracket from the transmission.



INSTALLATION
1. Install the transmission support bracket to the transmission. Install the bolts and tighten to 46 Nm (34 ft. lbs.) torque.
2. Install the support cushion to the support bracket. Install the nuts and tighten to 75 Nm (55 ft. lbs.) torque.
3. Position the crossmember onto the support cushion studs. Install the stud nuts and tighten to 22 Nm (192 in. lbs.) torque.
4. Install crossmember-to-sill bolts and tighten to 41 Nm (30 ft. lbs.) torque.
5. Remove the transmission support.
6. Lower the vehicle.
7. Connect negative cable to battery.

pro multis · About Operation CHARM