Side Marker Lamp Unit Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. From underside of the fender flare, remove nut attaching marker/repeater lamp to fender.
3. Separate lamp from fender flare.
4. Rotate bulb socket one-third turn counter-clockwise and separate socket from lamp housing.

INSTALLATION
1. Position bulb socket in lamp housing and rotate bulb socket one-third turn clockwise.
2. Position lamp in fender flare.
3. Install nut attaching marker/repeater lamp to fender flare.
4. Connect battery negative cable.