Wheel Replacement

WHEEL REPLACEMENT
Wheels must be replaced if they have:
- Excessive runout
- Bent or dented
- Leak air through welds
- Have damaged bolt holes
Wheel repairs employing hammering, heating, or welding are not allowed. Original equipment wheels are available through your dealer. Replacement wheels from any other source should be equivalent in:
- Load carrying capacity
- Diameter
- Width
- Offset
- Mounting configuration
Failure to use equivalent replacement wheels may affect the safety and handling of your vehicle. Replacement with used wheels is not recommended. Their service history may have included severe treatment.

STANDARD PROCEDURE - WHEEL REPLACEMENT

The wheel studs and nuts are designed for specific applications. They must be replaced with equivalent parts. Do not use replacement parts of lesser quality or a substitute design. All aluminum and some steel wheels have wheel stud nuts which feature an enlarged nose. This enlarged nose is necessary to ensure proper retention of the aluminum wheels.
Wheels must be replaced if they have:
- Excessive runout
- Bent or dented
- Leak air through welds
- Have damaged bolt holes
Wheel repairs employing hammering, heating, or welding are not allowed. Original equipment wheels are available through your dealer. Replacement wheels from any other source should be equivalent in:
- Load carrying capacity
- Diameter
- Width
- Offset
- Mounting configuration
Failure to use equivalent replacement wheels may affect the safety and handling of your vehicle. Replacement with used wheels is not recommended. Their service history may have included severe treatment.