Fuel Injector: Service and Repair

REMOVAL
1. Remove fuel rail. Refer to Fuel Injector Rail Removal in this section.

Fig.11 Fuel Injector Mounting:

2. Disconnect clip(s) that retain fuel injector(s) to fuel rail (Fig. 11).

INSTALLATION
1. Install fuel injector(s) into fuel rail assembly and install retaining clip(s).
2 If same injector(s) is being reinstalled, install new O-ring(s).
3. Apply a small amount of clean engine oil to each injector O-ring. This will aid in installation.
4. Install fuel rail. Refer to Fuel Rail Installation.
5. Start engine and check for fuel leaks.