Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2004 >> Grand Cherokee 2WD L6-4.0L VIN S >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor Resistor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor Resistor: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Depress locking tab and unplug the wire harness connector from the blower motor resistor.
3. Depress locking tab and unplug the resistor connector from the blower motor.
4. Remove the 2 screws that secure the blower motor resistor to the HVAC housing.

Fig.16 Blower Motor Resistor Remove/Install:




5. Remove the blower motor resistor from the HVAC housing.

INSTALLATION
1. Install the blower motor resistor in the HVAC housing. The housing is indexed to allow mounting in only one position. Tighten the mounting screws to 2.2 Nm (20 in. lbs.).
2. Plug in the wire harness connector to the blower motor resistor.
3. Plug in the connector from the blower motor resistor to the blower motor
4. Connect the battery negative cable.
pro multis · About Operation CHARM