Headlamp: Service and Repair

REMOVAL




1. Remove the jack screw attaching the top of headlamp to the headlamp mounting module.




2. Grasp upper inboard and lower outboard corners of headlamp and pull headlamp outward.
3. Remove all of the bulb sockets from headlamp module.
4. Separate the headlamp from vehicle.

INSTALLATION

CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.

1. Install all of the bulb sockets in headlamp module.
2. Position the headlamp on the vehicle and align the ball studs with the sockets.
3. Push the headlamp inward to secure the ball studs with the sockets.
4. Install the jack screw attaching the top of headlamp to the headlamp mounting module.