Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2004 >> Liberty 2WD L4-2.4L VIN 1 >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Spray Nozzle >> Service and Repair >> Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front

REMOVAL
1. Unlatch and open the hood.
2. Remove both front wiper arms from the wiper pivots. (Refer to WIPERS/WASHERS/FRONT WIPER ARM - REMOVAL).
3. Remove the cowl plenum cover/grille panel from over the cowl plenum.

Fig.8 Front Washer Nozzle Remove/Install:




4. From the underside of the cowl plenum cover/ grille panel, disconnect the washer nozzle hose from the barbed nipple of the front washer nozzle .
5. From the underside of the cowl grille cover, release the integral snap features of the front washer nozzle and push the nozzle out through the mounting hole toward the top side of the cowl plenum cover/grille panel.
6. Remove the front washer nozzle from the top of the cowl plenum cover/grille panel.

INSTALLATION
1. From the top of the cowl plenum cover/grille panel, position the nipple end of the front washer nozzle through the mounting hole and engage the anti-rotation tab of the nipple into the anti-rotation notch in the mounting hole.
2. Push firmly and evenly on the top of the front washer nozzle until the integral snap features lock into place on the underside of the cowl plenum cover/ grille panel.
3. From the underside of the cowl grille cover, reconnect the washer hose to the barbed nipple of the front washer nozzle .
4. Reinstall the washer hose for the front washer nozzle into its routing clips on the underside of the cowl plenum cover/grille panel.
5. Reinstall the cowl plenum cover/grille panel over the cowl plenum.
6. Reinstall both front wiper arms onto the wiper pivots. (Refer to FRONT WIPERS/WASHERS/FRONT WIPER ARM - INSTALLATION).
7. Close and latch the hood.
pro multis · About Operation CHARM