Defrost Door
WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, DISABLE THE AIRBAG SYSTEM BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. DISCONNECT AND ISOLATE THE BATTERY NEGATIVE (GROUND) CABLE, THEN WAIT TWO MINUTES FOR THE AIRBAG SYSTEM CAPACITOR TO DISCHARGE BEFORE PERFORMING FURTHER DIAGNOSIS OR SERVICE. THIS IS THE ONLY SURE WAY TO DISABLE THE AIRBAG SYSTEM. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.REMOVAL
1. Remove the HVAC housing.
2. Remove the defrost door actuator.
3. Disassemble the HVAC housing.
Panel/Demist And Defrost Doors - Typical:
4. Remove the defrost door from the HVAC housing.
INSTALLATION
1. Position the defrost door inside the lower half of the HVAC housing.
2. Assemble the HVAC housing.
3. Install the defrost door actuator.
4. Install the HVAC housing.