Marker Lamp: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. From underside of the fender flare, remove the nut that secures the side marker lamp housing to the front fender flare.
3. Remove the lamp housing from the fender flare.
4. Rotate the socket one-third turn counterclockwise and separate the socket and lamp from the housing.

INSTALLATION
1. Install the socket and lamp into the housing and rotate the socket one-third turn clockwise.
2. Position the side marker lamp housing into the front fender flare.
3. Install the nut that secures the side marker lamp housing to the fender flare. Tighten the nut securely.
4. Reconnect battery negative cable.