Turn Signals: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.

Park/Turn Signal Lamp Assembly:

2. Remove the screws that secure the park/turn signal lamp housing to the front fender .
3. Remove the park/turn signal lamp housing from the fender.
4. Rotate the socket one-third turn counterclockwise and separate the socket and lamp from the housing.

INSTALLATION
1. Install the socket and lamp into the housing and rotate the socket one-third turn clockwise.
2. Position the park/turn signal lamp housing into the fender.
3. Install the screws that secure the park/turn signal lamp housing to the fender. Tighten the screws securely.
4. Reconnect the battery negative cable.