Support Plate

SUPPORT PLATE

REMOVAL





1. Remove wheel and tire assembly
2. Remove the disc brake caliper slide bolts (4).





3. Remove the rotor.





4. Remove the wheel speed sensor (2).





5. Remove the axle flange nuts (1).





6. Remove the axle shaft (1).





7. Remove the park brake shoes (1).





8. Remove the parking brake cable from the brake actuator lever (4).
9. Remove the support plate from the axle tube.

INSTALLATION





1. Install support plate on axle flange. Tighten attaching bolts (3) to 115 Nm (85 ft. lbs.).
2. Install parking brake cable in the brake actuator lever (4).





3. Install the park brake shoes (1).





4. Install axle shaft (1).
5. Install the axle shaft flange nuts (1).





6. Install the wheel speed sensor (2).





7. Adjust brake shoes to drum with brake gauge.





8. Install the rotor.





9. Install the caliper and the slide bolts (4).
10. Install the wheel and tire assembly.