Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2006 >> Commander 2WD V8-4.7L VIN N >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Seat Switch: Service and Repair

SWITCH-SEAT

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the seat cushion side panel from the seat and disconnect the electrical harness connector.
3. Using a small flat bladed tool, gently release the four mounting tabs that secure the power seat switch and separate switch from trim panel.

INSTALLATION
1. Position the power seat switch on the seat cushion side panel. Gently apply pressure to the switch until the four mounting tabs that secure the switch snap into place.
2. Connect the power seat switch electrical connector.
3. Install the seat cushion side panel on the seat.
4. Connect the battery negative cable.
5. Verify normal operation of the power seat assembly.
pro multis · About Operation CHARM