Door Lock Cylinder: Service and Repair

CYLINDER-LOCK

REMOVAL




1. Remove the exterior door handle (1) from the outside of the driver side front door.




2. Using hand pressure, push on the face of the lock cylinder (2) until it pops out of the cavity in the back of the door handle.

INSTALLATION




1. Insert the lock cylinder (2) into the cavity on the back of the driver side exterior door handle (1).
2. Apply hand pressure to the back of the cylinder to make sure it is fully seated in the handle.
3. Align the lock cylinder in the handle by aligning the two screw holes on the lock cylinder housing with the mounting holes of the door handle.




4. Install the exterior door handle (1) onto the outside of the driver side front door.