Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2006 >> Commander 2WD V8-5.7L VIN 2 >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Front Seat >> Front Seat Cushion
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Seat Cushion

CUSHION/COVER-CUSHION - FRONT

REMOVAL




1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to Seats / Service Precautions.
2. Move the seat to the forward position and disconnect and isolate the batter negative cable.
3. Remove the bolts (2) and the clamps (1) and remove the seat cushion.
4. Disconnect the electrical connector, if equipped.




5. Separate the j-straps (1 & 2) and seat cushion cover and foam.

INSTALLATION




1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to Seats / Service Precautions.
2. Position the cushion cover and foam over the seat pan and connect the j-straps (1 & 2).




3. Position the seat cushion assembly onto the seat frame and install the clamps (1).
4. Connect the wire harness to the seat cushion pan, if equipped.
5. Install the bolts (2) and tighten to 10 N.m (85 in.lbs).
6. Connect battery negative cable.
pro multis · About Operation CHARM