Pressure Line - Pump to HEC

PRESSURE LINE - PUMP TO HEC

REMOVAL





1. Siphon the power steering fluid from the reservoir.
2. Remove the air cleaner assembly.
3. Disconnect the power steering pressure line from the power steering pump.
4. Raise and support the vehicle.
5. Remove the front splash shield.
6. Remove the 3 bolts (2) for the oil filter drip tray (1) and remove the tray.





7. Disconnect the power steering pressure line (2) from the hec fan (1).
8. Remove the line from the vehicle.

INSTALLATION





1. Install the line (2) to the vehicle.
2. Reconnect the power steering pressure line (2) to the power steering gear (1) Tighten to 28 Nm (21 ft. lbs.).





3. Install the oil drip tray (1) and tighten the 3 bolts (2).
4. Install the front splash shield.
5. Lower the vehicle.
6. Reconnect the power steering pressure line to the power steering pump Tighten to 28 Nm (21 ft. lbs.).
7. Install the air cleaner assembly.
8. Refill the power steering fluid and bleed the system.