Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2006 >> Grand Cherokee 4WD V8-5.7L VIN 2 >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front

SENSOR-FRONT WHEEL SPEED

REMOVAL
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly
3. Remove the caliper adapter bolts. Support the caliper and adapter assembly Do Not let assembly hang by the hose..
4. Remove the disc brake rotor.





5. Remove the front wheel sensor mounting nut (2) to the hub (3).
6. Remove the wheel speed sensor (1) from the hub (3).





7. Disconnect the wire sensor routing clips (2).
8. Disconnect the wheel speed sensor wire connector (1).
9. Remove the sensor and wire.

INSTALLATION





1. Reconnect the wheel speed sensor wire connector (1).
2. Reroute and connect the wheel speed sensor wire to the routing clips (2).





3. Install the wheel speed sensor into the hub (3) and the install the mounting bolt (2) and tighten the nut to 12 - 14 Nm (106 - 124 inch lbs.).
4. Check the sensor wire routing (1). Be sure the wire is clear of all chassis components and is not twisted or kinked at any spot.
5. Install the disc brake rotor.
6. Install the caliper adapter over the rotor.
7. Install the caliper adapter bolts and tighten to 90 - 115 Nm (66 - 85 ft. lbs.).
8. Install the tire and wheel assembly.
9. Remove the support and lower vehicle.
pro multis · About Operation CHARM