Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2006 >> Wrangler L4-2.4L VIN 1 >> Repair and Diagnosis >> Heating and Air Conditioning >> Compressor Clutch Relay >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Compressor Clutch Relay: Service and Repair

A/C CLUTCH RELAY

NOTE: Refer to the fuse and relay layout map on the inside of the power distribution center (PDC) cover for A/C clutch relay location.

REMOVAL
1. Disconnect and isolate the battery negative cable.

Power Distribution Center - LHD Shown, RHD Similar:




2. Remove the cover from the power distribution center (PDC) located in the engine compartment.
3. Remove the A/C clutch relay from the PDC.

INSTALLATION
1. Position the A/C clutch relay into the receptacle of the PDC.
2. Align the A/C clutch relay terminals with the terminal cavities in the PDC receptacle and push down firmly on the relay until the terminals are fully seated.
3. Close the cover of the PDC.
4. Reconnect the negative battery cable.
pro multis · About Operation CHARM