Installation

3.7L - V6

CAUTION: Proper torque of the throttle body is critical to normal operation. If the throttle body is over-torqued, damage to the throttle body can occur resulting in throttle plate malfunction.

1. Check condition of throttle body-to-intake manifold O-ring. Replace as necessary.

2. Clean mating surfaces of throttle body and intake manifold.

3. Install throttle body-to-intake manifold O-ring.

4. Install throttle body (1) to intake manifold.

5. Install four mounting bolts (2). Tighten bolts to 7 Nm (60 in. lbs.) torque.

6. Install electrical connector (3).

7. Install necessary vacuum lines.

8. Install air cleaner duct at throttle body.