Removal

REMOVAL

1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.





Support the caliper, Do not let the caliper hang by the hose.

3. Remove the disc brake caliper (1).




4. Remove the brake caliper adaptor (1).




5. Remove and discard the O-ring (2) and then remove the disc brake rotor (1).




6. Remove the wheel speed sensor nut (2).
7. Remove the wheel speed sensor.

Remove the 3 hub bearing mounting bolts from the back of the steering knuckle. Remove hub bearing (3) from the steering knuckle.