Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Commander 2WD V8-5.7L VIN 2 >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Front Steering Knuckle >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION




1. Install the knuckle (1) to the vehicle.
2. Install the lower ball joint into the knuckle.
3. Install the lower ball joint nut. Tighten the nut to 95 Nm (70 ft.lbs.).




4. Install the upper ball joint (2) into the knuckle (3)
5. Install the upper ball joint nut (4). Tighten the nut to 95 Nm (70 ft.lbs.).




6. Install the outer tie rod end to the steering knuckle.




7. Install the hub/bearing (3), Tighten to 115 Nm (85 ft.lbs.).
8. Install the axle shaft nut. Tighten the nut to 135 Nm (96 ft.lbs.).(if equipped with four wheel drive).
9. Install the wheel speed sensor (2) and reclip the wire to the knuckle.




10. Install the disc brake rotor (1).




11. Install the caliper adapter (1).
12. Install the tire and wheel assembly.
13. Perform wheel alignment.
pro multis · About Operation CHARM