Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Commander 4WD V8-4.7L VIN N >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Trim Panel >> Service and Repair >> Trim Panel >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION




1. Check to be certain that the push-in plastic fasteners are properly installed and in good condition on the inside of the trim panel.

2. Connect the courtesy lamp (1) electrical connector (2)




3. Using hand pressure, press firmly and evenly on the trim panel (1) over each of the push-in plastic fastener locations until the fasteners are fully engaged in the holes on the inside of the liftgate.

4. Install and tighten the five screws (3) that secure the trim panel to the inside of the liftgate.

5. Connect the battery negative cable.

pro multis · About Operation CHARM