Removal

REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions.

2. Remove the seat cushion as necessary.

Power




1. Remove the seat risers.

2. Remove the bolts and nuts (2 & 4) and separate the height adjuster assembly from the length adjuster assembly (3).

NOTE: Bolt (4) is a different size from the other three bolts (2). Note the location for proper installation.






WARNING: A seat structure that has seen significant load may have the locking mechanism activated and may exhibit the following symptoms:
- Locking pawl (2) loose
- Locking pawl (2) engaged into the seat frame sidemember (1)
- Height adjuster only works on outboard side
- Broken or missing shear pin (3)


If any one or more of these symptoms exist replace the height adjuster assembly. Do not attempt any repairs. Failure to follow these instructions may result in personal injury or death.

Manual




1. Remove the spring clip.




2. Squeeze the towel bar together and pull the towel bar out of the left and right seat tracks.




3. Remove the bolts (1 & 4), nuts (6) and spacers (2) and separate the side member assembly (3) from the length adjuster assembly (5).