Installation

INSTALLATION




1. Install the cooler tubes in the clips on the side of the frame rail.
2. Install the fluid cooler mounting screws (4) to the support. Tighten the screws to 8 Nm (71 in. lbs.).
3. Install the fluid return hose (7) on the power steering fluid cooler lines (5). Install the hose clamp (6) on the hose past the bead formed into the end of the cooler tube and secure in place.
4. Install the front fascia.
5. Lower the vehicle.
6. Fill and bleed the power steering system.
7. Check for leaks.