Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Compass 2WD L4-2.4L VIN W >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Throttle Body >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






2.0/2.4L




1. Make sure that the throttle body O-ring (1) is in place in the manifold.




2. Position throttle body on intake manifold alignment pins and install 2 mounting bolts. Do Not tighten bolts at this time.




3. Install throttle body bracket.

4. Tighten throttle body bolts in a cross pattern to 9 Nm (79.5 in. lbs.).




5. Throttle body bracket installed.




6. Connect electrical connector to throttle body.




7. Install air tube and connect wiring harness to air tube.

8. Connect negative battery cable.

9. A Scan Tool may be used to learn electrical parameters. Go to the Miscellaneous menu, and then select ETC Relearn. If the relearn is not preformed, a Diagnostic Trouble Code (DTC) will be set. If necessary, use a scan tool to erase any Diagnostic Trouble Codes (DTC's) from PCM.

pro multis · About Operation CHARM