Disassembly

DISASSEMBLY




1. Remove the snap ring (2) that retains the input shaft bearing and sixth gear to the shaft.




2. Using a press (1) and steel blocks (4) remove sixth gear and the bearing (3) from the shaft.




3. Using a Press (3) and the Bearing Splitter 1130 (1) remove third gear (2) from shaft.
4. Remove the spacer.




5. Using a Press (3) and the Bearing Splitter 1130 (1) remove forth gear (2) from shaft.




6. Using a Press and the Bearing Splitter 1130 (3) remove the input shaft bearing race (2).