Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Compass 4WD L4-2.4L VIN W >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Overhaul >> T355 Manual Transaxle >> Overhaul (Subassemblies) >> Input Shaft >> Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Assembly






ASSEMBLY




1. Place input shaft into shop press.
2. Install 3rd gear caged needle bearing (2).




3. Install 3rd gear and 3-4 synchronizer (4) onto input shaft. Install Sleeve C-3717 (2) over input shaft and press on synchronizer hub and 3rd gear. The synchronizer hub has the letter U stamped on the top face of the hub. This designates that the hub must be installed with the U facing upward.




4. Install a new 3-4 synchronizer snap ring into slot on input shaft.
5. Install blocking ring into 3-4 synchronizer. Install 4th gear caged needle bearing.
6. Install 4th gear onto input shaft.
7. Install 4-5 split thrust washer separation pin (1).




8. Install split thrust washer (2) onto input shaft (1).




9. Install split thrust washer retaining ring (1).




10. Install 5th gear caged needle bearing (2).




11. Using Sleeve C-3717 (2), install 5th speed gear (5) and synchronizer (3). The 5th gear synchronizer hub has the letter S stamped on the top face of the hub. This designates that the hub must be installed with the S facing upward.




12. Install a new 5th gear synchronizer snap ring (4).
pro multis · About Operation CHARM