Installation

INSTALLATION






NOTE: LHD model shown. RHD model similar.

NOTE: Refer to the fuse and relay layout map on the inside of the power distribution center (PDC) cover for A/C clutch relay location.

1. Position the A/C clutch relay into the proper receptacle of the PDC (1) located near the battery (2) in the engine compartment.

2. Align the A/C clutch relay terminals with the terminal cavities in the PDC receptacle and push down firmly on the relay until the terminals are fully seated.

3. Close the cover of the PDC.

4. Reconnect the negative battery cable.