Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Removal
3.7L ENGINEThe Engine Coolant Temperature (ECT) sensor (3) is installed into a water jacket at front of intake manifold near rear of generator.
WARNING: Hot, pressurized coolant can cause injury by scalding. Cooling system must be partially drained before removing the coolant temperature sensor. 1.
Partially drain cooling system.
2.
Disconnect electrical connector from sensor.
3.
Remove sensor from intake manifold.
