Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Liberty 2WD V6-3.7L VIN K >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Powertrain Control Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Powertrain Control Module - Installation






INSTALLATION

Use the scan tool to reprogram the new powertrain control module (PCM) with the vehicles original identification number (VIN) and the vehicles original mileage. If this step is not done, a diagnostic trouble code (DTC) may be set.




1. Install PCM (1) and three mounting bolts (2) to vehicle.

2. Tighten bolts. Refer to torque specifications.

3. Check pin connectors in the PCM and its connectors for corrosion or damage. Also, the pin heights in connectors should all be same. Repair as necessary before installing connectors.

4. NGC Modules : Carefully install the four 38-way connectors into PCM. JTEC Modules : Carefully install the three 32-way connectors into PCM.

5. Install cover over electrical connectors. Cover snaps onto PCM.

6. Install battery cable.

7. Use the scan tool to reprogram new PCM with vehicles original Identification Number (VIN) and original vehicle mileage.
pro multis · About Operation CHARM