Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Liberty 2WD V6-3.7L VIN K >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Junction Block >> Installation >> Installation - RHD
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation - RHD






INSTALLATION - RHD

1. Position the junction block and install the four junction block retaining screws.

2. Install the upper and forward most group of relays in the junction block.

3. Install the two ground wires on the right lower kick panel area.

4. Working through the steering column opening cover, install the three bulkhead and two body controller electrical connectors on the junction block assembly.

5. Install the courtesy lamp under the right side of the instrument panel.

6. Install the right cowl trim panel on the vehicle.

7. Install the steering column opening cover.

8. Install the right outboard trim bezel on the instrument panel.

9. Install the right end cap on the instrument panel.

10. Connect the negative battery cable.
pro multis · About Operation CHARM