Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Patriot 2WD L4-2.0L VIN 0 >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION





The speed control switch is mounted in the steering wheel and wired through the clock spring device under the airbag module.




1. Connect the electrical connector to speed control switch.




2. Install the 2 speed control screw.

3. Tighten the screws (1) to 1.6 Nm (15 in. lbs.). Make sure rubber seal is in place around switch.




4. Install the horn switch.

5. Install the three mounting fasteners.

6. Connect the electrical connector to the clockspring.




7. Install the driver airbag (3).

WARNING: Do not connect battery negative cable yet. Refer first to airbag system test.

8. Reconnect battery using Airbag System Test procedure in Restraints.

9. Close hood.

10. Verify vehicle and system operation.
pro multis · About Operation CHARM