Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Console >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation




INSTALLATION





1. Position the console (4) over the shifters and brake levers and seat the clips (3) fully.

2. Install the four screws (1).





3. Connect the electrical connector (1).





4. Position the bezel (2) over the shifters and brake lever and seat the clips fully.

5. Install the cup holder and ash receiver (1), if equipped.





6. If equipped, position the transfer case shifter knob onto the shift shaft and seat fully.





7. If equipped, position the manual transmission shifter handle (2) onto the shift shaft (1) and install the bolt (3).

8. Tighten the bolt (3) to 33 Nm (24.5 ft. lbs.)





9. Seat the shifter boot (2) onto the console bezel (1) and seat fully.

10. Connect battery negative cable.

pro multis · About Operation CHARM