Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Brakes and Traction Control >> Drum Brake System >> Backing Plate >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION

NOTE: After parking brake lining replacement, it is recommended that the parking brake system be conditioned prior to use. This is done by making one stop from 25 mph on dry pavement or concrete using light to moderate force on the parking brake lever.

1. Install the support plate on the axle seal plate. Tighten the bolts to
2. Reassemble the rear park brake shoes.
3. Install the support plate on the axle shaft.
4. Install the axle shaft to the axle.
5. Reconnect the brake cable to the park brake shoe lever behind the support plate.
6. Install the rear park brake cable at the equalizer.
7. Remove the lockout on the front park brake cable.
8. Install the rear wheel speed sensor.
9. Adjust the rear brake shoes.
10. Install the disc brake rotor.
11. Install the disc brake caliper adapter.
12. Install the tire and wheel assembly.
13. Check and fill the rear axle fluid.
14. Lower the vehicle.
15. Check the operation of the park brake system.
pro multis · About Operation CHARM