Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Lighting and Horns >> Backup Lamp >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






LAMP





1. Check to be certain that the two spring nuts (2) are in good condition and properly installed in the rear body sheet metal.

2. Position the rear lamp unit (4) to the lamp opening of the rear body sheet metal.

3. Reconnect the body wire harness connector (1) to the bulb socket pigtail wire connector on the back of the lamp housing.

4. Engage the two tabs on the back of the lamp housing with the outboard edge of the lamp opening in the rear body sheet metal.

5. Align the mounting holes on the inboard side of the lamp to the two spring nuts.

6. Install and tighten the two screws (3) that secure the inboard side of the rear lamp unit to the body sheet metal. Tighten the screws to 1.5 Nm (15 in. lbs.).

7. Reconnect the battery negative cable.
pro multis · About Operation CHARM