Bulb

BULB

CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the socket or the lamp wiring.





1. While holding the cargo lamp housing bezel (3) flush with the sport bar trim, align the ends of the bulb (4) with the two bulb holders within the lamp housing (2).

NOTE: If the lamp housing is lowered from the mounting hole, the lamp MUST be reinstalled as per the installation procedure.

2. Carefully press the bulb firmly and evenly into the bulb holders until it snaps into place.

3. Swing the notched end of the lens (1) up into position against the housing, then press upward on the lens firmly and evenly until it snaps into place.

4. Reconnect the battery negative cable.