Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Service and Repair >> Engine Control Module - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module - Removal






REMOVAL





The ECM (Engine Control Module) (2) is located in the engine compartment.

Use a diagnostic scan tool to reprogram the new ECM with the vehicles original identification number (VIN) and the vehicles original mileage. If this step is not done, a Diagnostic Trouble
Code (DTC) may be set.

To avoid possible voltage spike damage to the ECM, ignition key must be off, and negative battery cable must be disconnected before unplugging ECM connectors.

1. Disconnect negative battery cable at battery.

2. Remove plastic shields from over electrical connectors. Shields snap to connectors.

3. Carefully unplug two electrical connectors (1) from ECM.

4. Remove ECM mounting bolts (3) and remove ECM (2) from vehicle.
pro multis · About Operation CHARM