Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Starting and Charging >> Battery >> Battery Tray >> Service and Repair >> Battery Tray - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery Tray - Removal






REMOVAL





WARNING: The battery negative and positive cable polarity are different from the gasoline engine equipped vehicles to the diesel engine equipped vehicles. Please note the location of the positive and negative cables prior to service of the battery or related components.

NOTE: Left hand drive gasoline engine shown, left hand drive diesel similar. Right hand drive gasoline and diesel similar with the battery and related components packaged on the left side of the engine compartment.

1. Disconnect and isolate the battery negative cable.

2. Disconnect the fresh air tube (2) from the air cleaner assembly (1).

3. Remove the air cleaner assembly (1) from the battery tray (4) by pulling up on the air cleaner to disengage the mounting pins.

4. Remove the battery.

5. Remove the Totally Integrated Power Module.





6. Remove the four bolts (2 and 5) and one nut (3) securing the battery tray (4) to the vehicle.

7. Lift the battery tray out of the engine compartment and remove from the vehicle.
pro multis · About Operation CHARM