Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION




1. Align and install column (1) into the steering coupler.




2. Install column harness (1) and connect harness to switches.
3. Reroute the shifter interlock cable through the tie straps.




4. Install the column (1) onto the mounting studs (2).
5. Install the two mounting nuts and the two mounting bolts all finger tight.

CAUTION: Lower nuts must be installed and tightened first then the upper nuts in order to prevent damage to the capsules.

6. Tighten the lower mounting nuts to 17 Nm (150 in. lbs.).
7. Tighten the upper mounting nuts to 17 Nm (150 in. lbs.).




8. Install the steering column coupler bolt and tighten to 49 Nm (36 ft. lbs.).
9. Reconnect the shifter interlock cable.
10. Center the clock spring (3) (if necessary) and install it on the column (4).




11. Snap together the column shrouds (1&2) and install the mounting screws.




12. Install the steering column opening cover.

NOTE: Do not reuse the old steering wheel bolt (a new bolt must be used)

NOTE: Be certain that the steering wheel mounting bolt is tightened to the proper torque specification to ensure proper clockspring operation.

13. Install the steering wheel and tighten bolt to 54 Nm (40 ft. lbs.).

NOTE: If equipped with cruise control, connect clock spring harness to cruise switch harness on the steering wheel.

14. Install the airbag.
15. Install the negative battery terminal.