Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Control Arm >> Service and Repair >> Front >> Lower Control Arm >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION




1. Position the lower suspension arm (4) in the axle bracket and frame rail bracket.

NOTE: Position the paint dot located on the control arm toward the axle and facing outboard. If paint dot is not visible, the bend should point inboard, and the short end should attach to the axle side.

NOTE: Frame and axle bolts should be installed outboard to inboard.

2. Install the frame bolt and nut (3) finger tighten.
3. Install bolt and new nut (3) finger tighten in the axle.
4. Lower the vehicle.
5. Tighten axle bracket nut to 169 Nm (125 ft. lbs.).
6. Tighten frame bracket nut to 169 Nm (125 ft. lbs.).
7. Align vehicle to specifications.
pro multis · About Operation CHARM