Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Lateral Stabilizer Rod >> Service and Repair >> Front >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION




1. Install the track bar (2) at axle tube bracket. Loosely install the retaining bolt and flag nut (1).





NOTE: Frame bolt must be installed from front to rear.

2. It may be necessary to pry the axle assembly over to install the track bar (1) at the frame rail. Install track bar at the frame rail bracket. Install the nut and bolt (2) at the frame rail bracket.
3. Remove the supports and lower the vehicle.
4. Tighten the bolt at the frame and axle bracket to 169 Nm (125 ft. lbs.).
5. Check toe if a new track bar was installed.
pro multis · About Operation CHARM