Power Windows

B210E-BATTERY VOLTAGE HIGH

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
When a power opening or closing operation is not occurring.

- Set Condition:
Anytime the Power Liftgate Module senses voltage input above 16 volts when a power opening or closing operation is not occurring, this code will set.





Diagnostic Test

1. CHECK ENGINE DTCs
With the scan tool, read ENGINE DTCs
Are there any ENGINE DTCs present?

No

- Go To 2

Yes

- Diagnose and repair the DTC(s).

2. TEST FOR INTERMITTENT CONDITION
With the scan tool, record and erase DTCs
Start the engine and run for 2 minutes.
With the scan tool, read DTCs.
Does the scan tool display B210E-BATTERY VOLTAGE HIGH?

Yes

- Replace the appropriate Door Module.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test