Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2008 >> Commander 2WD V8-4.7L >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Trunk / Liftgate >> Trunk / Liftgate Motor >> Service and Repair >> Power Liftgate Drive Unit - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Liftgate Drive Unit - Removal







REMOVAL





1. Open the liftgate.
2. Disconnect and isolate the battery negative cable.
3. Remove the link rod assembly from the liftgate attachment point, Removal.
4. Remove the left rear D-pillar trim panel from the vehicle, Removal.
5. Remove the left quarter trim panel, . Quarter Trim Panel - Removal
6. Disconnect the wire harness connector from the power liftgate drive unit assembly (1).
7. Remove the drive unit assembly retaining bolts (5).
8. Remove the drive unit assembly retaining nut (4).
9. Unhook the drive unit assembly (1) from the D-pillar (2) and remove the unit from the vehicle.
pro multis · About Operation CHARM