Headliner - Installation

INSTALLATION





1. Position the headliner (5) into the vehicle from the liftgate.
2. Lift headliner into place and seat the fasteners (1) (hook and loop or clips) fully.
3. Install the grab handles (3) and install the screws.




4. Connect the headliner wire harness connectors (3) located at the left D-pillar.
5. Connect the rear washer hose (1).




6. Install the push pins (3).




7. Install the D-pillar trim (1), Installation.




8. Position the rear header molding (2) and seat the clips fully.




9. Return the seats to their operating positions.
10. Install the C-pillar trim, C-Pillar Trim Panel-Installation




11. Install the upper B-pillar trim, Installation.




12. Install the overhead video monitor, Installation




13. Connect the electrical connectors (1 and 2).
14. Position the visor storage unit (3) and seat into the headliner fully.




15. Install the overhead console, Overhead Console - Installation.




16. Install the sun visors and install the screws.




17. Install the sun visor supports and install the screws.




18. Connect the headliner wire harness connector at the right A-pillar and washer hose located at the left A-pillar.
19. Install the A-pillar trim panels, Installation.




20. Install the sunroof trim ring, Installation
21. Position the door seals back in place.