Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2008 >> Liberty 2WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Frame >> Cross-Member >> Front Cross-Member >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







INSTALLATION





1. Place the cradle on a suitable lifting device, then raise the engine cradle into the vehicle while lining up the engine mount through bolts.

NOTE: Refer to the reference marks made during cradle removal procedure and align the cradle to those marks.

2. Install the cradle mounting bolts and tighten the front bolts to 122 Nm (90 ft. lbs.) and tighten the rear bolts to 115 Nm (85 ft. lbs.).
3. Tighten the engine mount through bolts to 88 Nm (65 ft. lbs.).




4. Install the steering gear, Steering Gear - Installation.




5. Install the front axle, if equipped, .
6. Install the stabilizer bar, Front Stabilizer Bar - Installation.




7. Install the lower control arms, Front Lower Control Arm - Installation.




8. Lower the vehicle and remove the engine support tool.
pro multis · About Operation CHARM