Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2008 >> Liberty 2WD V6-3.7L >> Repair and Diagnosis >> Lighting and Horns >> Parking Lamp >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







LAMP





1. Position the front park/turn signal lamp to the outer surface of the front fascia by inserting the studs on the back of the lamp housing into the mounting holes of the fascia.
2. Install and tighten the two nuts (3) that secure the studs of the lamp housing to the inside surface of the front fascia (1). Tighten the nuts securely.
3. Reconnect the wire harness connector (2) to the connector receptacle integral to the bulb socket.
4. Reinstall the liner to the front of the front fender wheel house. Front Wheelhouse Splash Shield - Installation.
5. Reconnect the battery negative cable.
pro multis · About Operation CHARM