Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2008 >> Wrangler 2WD V6-3.8L >> Repair and Diagnosis >> Starting and Charging >> Battery >> Battery Tray >> Service and Repair >> Battery Tray - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery Tray - Installation







INSTALLATION





1. Position the battery tray (4) into the engine compartment.
2. Loosely install the one nut (3) and four bolts (2 and 5) securing the battery tray (4) to the vehicle.
3. Tighten the nut to 10.5 Nm (93 in. lbs.)
4. Tighten the bolts to 10.5 Nm (93 in. lbs.)
5. Install the Totally Integrated Power Module (TIPM), Installation
6. Install the battery, Battery - Installation.




7. Install the air cleaner assembly (1) to the battery tray (4) by pushing down on the air cleaner to fully engage the mounting pins.
8. Connect the fresh air tube (2) to the air cleaner assembly (1).
9. Connect the battery negative cable.
pro multis · About Operation CHARM