Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2009 >> Compass 4WD L4-2.0L >> Repair and Diagnosis >> Heating and Air Conditioning >> Air Duct >> Service and Repair >> Instrument Panel Duct - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Instrument Panel Duct - Installation






INSTALLATION

NOTE: LHD model shown in illustrations. RHD model similar.

NOTE: The driver side instrument panel duct is serviced only as an assembly with the inner driver side demister duct.





1. Position the passenger side instrument panel duct (2) onto the top of the instrument panel support.
2. Install the screw (1) that secures the passenger side instrument panel duct to the instrument panel support. Tighten the screw to 2.2 Nm (20 in. lbs.).





3. If removed, connect the outer demister duct (1) to the driver side demister duct (3).
4. Position the driver side instrument panel duct (6) and demister duct to the instrument panel support and connect the driver side instrument panel duct to the passenger side instrument panel duct (5). Make sure the ducts are fully engaged to each other.
5. Connect the demister hose (4) to the driver side demister duct. Make sure the hose is fully engaged to the duct.
6. Install the four screws (2 and 7) that secure driver side instrument panel duct and demister duct to the instrument panel support. Tighten the screws to 2.2 Nm (20 in. lbs.).
7. Install the lower and upper instrument panel covers Instrument Panel Cover - Installation.

pro multis · About Operation CHARM