Oil Pump, Engine

OIL PUMP





NOTE: Use a three step procedure when tightening BSM mounting bolts.

For new 180 mm bolts, use the following torque specifications:

Tighten new 180 mm BSM mounting bolts as follows:
Tighten to 15 Nm (11 ft. lbs.) in the sequence shown.
Tighten to 33 Nm (24 ft. lbs.) in the sequence shown.
Rotate bolts an additional 90° in the sequence shown.

For 185 mm bolts, use the following torque specifications:

Tighten 185 mm BSM mounting bolts as follows:
Tighten to 15 Nm (11 ft. lbs.) in the sequence shown.
Tighten to 29 Nm (22 ft. lbs.) in the sequence shown.
Rotate bolts an additional 90° in the sequence shown.