Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2009 >> Compass 4WD L4-2.0L >> Repair and Diagnosis >> Starting and Charging >> Battery >> Battery Tray >> Service and Repair >> Battery Tray - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery Tray - Installation






INSTALLATION





1. Place the battery tray (3) into the engine compartment over the left frame rail (4).
2. Install the one nut (2) and four bolts (1) securing the battery tray (3) to the frame rail (4).
3. Tighten the nut to 10.5 Nm (93 in. lbs.).
4. Tighten the bolts to 10.5 Nm (93 in. lbs.).
5. Install the battery Battery - Installation.





6. On diesel engine equipped vehicles install the diesel vacuum valve. Push the bracket (1) down until the mounting tabs are completely seated into the receptacles (2) in the battery tray.





7. On diesel engine equipped vehicles connect the vacuum connector (3) and electrical connector (1) to the diesel vacuum valve (2).
8. Connect the battery negative cable.

pro multis · About Operation CHARM